Back to top
Send SMS Send Inquiry
Home » Products » Infant care Equipment » Infant Radiant Warmer

Infant Radiant Warmer

Infant Radiant Warmer
Infant Radiant Warmer
Send Inquiry
Product Code : LE-0004
Brand Name : Libra Enterprises
Product Description

Infant Radiant Warmer

Infant Radiant Warmer with Fixed Baby Cradle and Drawers with Microprocessor based temperature controller with 4 modes Skin / Air / Manual / Prewarm mode                                    

Standard Specifications

  • Fixed height warmer with attached baby cradle and drawers mounted on 4 (100 mm) wheels, 2 with brake.
  • Stainless steel baby tray with water proof, zipped cover mattress of density approx.21-25 kg/m³
  • Continuous head up/down facility
  • X-Ray cassette holder
  • Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
  • Slots for sensor and ventilator tubing
  • Side tray for placement of monitor
  • Stainless steel infusion rod with facility to mount Syringe/infusion pump
  • Lower shelf below baby tray to facilitate under surface photo therapy, Facility of 3 drawers for storage
  • Height : 74. (1890 mm), Width : 28.0 (710 mm), Length : 39.0 (990 mm)
  • Bed to Floor Height : 37.5 (950 mm)
  • Distance between baby bed and heater: 33 (840 mm)
  • Mattress size: 30(762 mm) x 20 (508 mm)
  • Height of side panel above baby bed: 5.75³ (145 mm)

Performance/Electrical Specifications

  • Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
  • LED Display of Skin Temp.,Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
  • LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
  • Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
  • Modes of Operation: Skin Servo, Air, Manual and Pre-Warm
  • Keypad lock facility
  • Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
  • Air mode: Temperature range: Room temp. to 39°C , Resolution : 0.1°C
  • Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
  • Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode) Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
  • Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
  • Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)

Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows

  • Alarm Condition     :        Alarm Messages on LCD
  • Skin Sensor is unplugged /Faulty       :     Skin Sensor Fail
  • Air Sensor is unplugged /Faulty    :      Air Sensor Fail
  • Measured skin temperature higher than set temperature by 1.0°C   :   Skin Temp. High
  • Measured skin temperature lower than set temperature by 1.0°C   :  Skin Temp. Low
  • Measured skin temperature higher than 38.0°C (With cut-off)  :    Skin Over Range
  • Measured skin temperature lower than 34.0°C     :Skin Under Range
  • Measured air temperature higher than set temperature by 1.5°C   :  Air Temp. High
  • Measured air temperature lower than set temperature by 3.0°C :     Air Temp. Low
  • Measured air temperature higher than 39.0°C (With cut-off  :   Air Over Range
  • Heater power is 100% for more than 15 mins     :   Chk Sens Position
  • Heater is unplugged or faulty      :         Heater Open
  • Heater Power drive fail/uncontrollable       :   Chk. Pwr. Drive
  • Power Fail Alarm    :     Audio with LED indicator



LIBRA ENTERPRISES
X


1228, 1st Floor, Opp. Hargolal Lal, Post Office, Ambala Cantt, Ambala - 133001, Haryana, India
Phone :+918068344010
Mr Rajiv Jain (C.E.O.)
Mobile :+918068344010

Product Showcase
Send SMS Send Inquiry